The Majik DSM is not a substandard mini amplifier, but a very complete device with a 2 x 100 Watt class D amplification hatch that can also be an end point in terms of hi-fi purchases.\u00a0Playing music from your favorite music service or from vinyl on a connected turntable?\u00a0Want to hunt the sound of your TV through a set of stereo speakers in high quality?\u00a0And – unexpectedly with a hi-fi device – be the hub for your game consoles and digital TV decoder?\u00a0Thanks to the extensive streaming options, phono input, some digital inputs, four HMDI ports \/ one HDMI-ARC output, and 2 x 100 Watt amplification, the Majik DSM from 3,570 euros can do it all.\u00a0Linn’s own room correction function is also back.<\/span><\/p>\n <\/a><\/p>\n Linn, who always really does it his way, sees this amplifier potentially as the foundation for a full Linn system.\u00a0That is why there are also packages in which the Majik DSM is combined with an LP12 turntable and the 109 or 140 speakers of the Scottish brand.\u00a0Special baseboards and coatings for those speakers are possible, as you would expect from a brand that has always considered customization of paramount importance.\u00a0The Majik DSM can of course also be used with your own speakers, and that is how we tested the device.<\/p>\n We looked up when we plugged in the brand new Majik DSM.\u00a0It was really a brand new device, just delivered from Glasgow and immediately lent to us by Linn specialist Alex from Concerto Audio in Amsterdam.\u00a0In the test room, because of this unused status, we were treated to a kind of mini light show in all kinds of bright colors, projected downwards by a series of LEDs that are subtly hidden behind an edge under the screen.\u00a0It is now also not that the room was filled with a huge disco show, but it surprised a moment by its frivolity.\u00a0We thought of our built-in dishwasher in a similar way with a light effect on the floor that it is time again to start a discussion within the family about who can unload the thing.\u00a0Audio reviewers, practice shows,\u00a0often lose out.\u00a0The Linn’s light show, however, is a one-off to indicate that the device is being set up for the first time.\u00a0Once configured, the device will project a thin line of colored light to indicate that it is turned on.\u00a0By default, this line is blue, but you can also choose a different color via the app.\u00a0Magenta, green, white or nothing at all (better in darkened TV rooms), whatever you want.<\/p>\n Of course this is a detail, but it does indicate something.\u00a0Namely, that Linn remains on track to completely modernize its offering.\u00a0Something that you will also notice in the new app – but more about that in a moment.\u00a0But let’s talk about that look first.\u00a0Compared to the previous Majik, the new edition looks a lot more modern.\u00a0That is a new design direction at the Scots, because the new generation of Linn devices are all a bit more refined and luxurious than their predecessors.\u00a0We discovered this earlier in the test of the more expensive Selekt, a modular machine that you can use as a pure network player or as an all-in-one amplifier.\u00a0You don’t have those upgrade options with the Majik.\u00a0What you buy is what you get.<\/p>\n It’s a bit difficult to estimate, but Linn’s Scots may have been the first to market a real streamer.\u00a0That was surprising because so many years ago the company was mainly known for its Sondek LP12 record player – but again no surprise because Linn always attached enormous importance to the place of the source in an audio story.<\/p>\n As more and more people listened to music files and streams, the company felt it was time to offer a digital source device in addition to the iconic Sondek and Linn’s then-popular CD players.\u00a0That very first player was the Klimax DS, followed moments later by the first Majik – the ancestor of the device we are looking at here.\u00a0This device was revolutionary because it combined streaming with a preamplifier, and could also stream a connected source (a turntable, anyone?) Over the network.\u00a0Since Linn remains very faithful to a particular model name, the name was also kept for new iterations of the device.\u00a0So today we come to the Majik DSM 2020, a player that is as versatile as before – what do we say:\u00a0more versatile – and packed in a housing that in design terms resembles the beautiful Selekt DSM that we have previously tested.\u00a0The splendor of that more expensive player, which is largely made of glass and aluminum and comes with a mighty volume knob \/ controller, is hard to match at a much lower price point.\u00a0But it has to be said: Linn did his best.<\/span><\/p>\n When you see the Majik DSM, you don’t think that there has been a lot of skimping on materials.\u00a0The clever use of a beautiful plastic makes the facade of the player sober yet eye-catching.\u00a0When you are listening to music, the entire front presents itself as a black mirrored surface.\u00a0No seams, no buttons, just a headphone jack in one corner and a very small print brand name in the other corner.<\/span><\/p>\n There are buttons on the device, but they are arranged in a beveled edge.\u00a0And yes, here too Linn is again fully committed to minimalism.\u00a0There are no function names on the buttons, they present themselves completely unanimously.\u00a0You quickly learn that six of the seven are ‘pins’, Linn’s name for preset buttons that you can link to a particular music source.\u00a0An internet radio station, for example, or a playlist for a streaming service.\u00a0The last button is a volume control.\u00a0The shiny front panel continues on the sides and top, to merge into a powder-coated metal housing.<\/span><\/p>\n So the device looks very dark and mysterious – until you press a button or stream a song.\u00a0Then a white on black display behind the front panel lights up, and you get some information about the track or the volume level is shown.\u00a0Limited, but you can also say: just enough information.\u00a0And with letters that you can easily read from four meters away.<\/span><\/p>\n By the way, you can set everything related to the display and the LED indicator via the settings.\u00a0You do not do this via an app or via the screen on the Majik DSM, but via the browser.\u00a0No, you shouldn’t start juggling with IP addresses or the like, just log in via the Linn website.\u00a0Here you will find many options to fine-tune the device to your use.\u00a0For example, you can turn off sources you don’t need so that when changing the input you don’t scroll through a long list of useless options.\u00a0There are still a lot of useful things, such as the boot volume or which source the Majik DSM will choose first.\u00a0For tweaking TV sound, there is also the necessary equipment and you can link a number of buttons on the supplied remote to a source of your choice.\u00a0We find that useful,<\/p>\n Speaking of adjustability: something that we find very useful with Linn devices are precisely those ‘pins’ or presets.\u00a0You operate them via the buttons on the device itself, the remote control or via the Linn app.\u00a0One option is to link a number of presets to specific sources (such as the TV or the turntable), but it is also interesting to give a favorite radio station its own pin, for example.<\/p>\n The best partner for a Majik DSM (or a higher model, such as the Selekt) is an iPad.\u00a0On an iPad or iPhone you can use the new Linn app, which scores very highly in terms of looks and ease of use.\u00a0Simply, it’s clear and includes just the functions you need, with the ability to turn off unnecessary sources for an even tighter user experience.\u00a0Via this app you can choose music on a NAS or via a streaming service (Qobuz and Tidal are supported in the app), with a handy search function to search for music across all streaming sources.\u00a0We found in testing that the search works fine on its own, but in the case of DLNA shares, the server must support it.\u00a0We could search on a Minimserver share, but not in a folder shared via the DLNA server embedded in a Synology server.<\/p>\n The Linn app (or the older, still available Kazoo app) also contains multiroom options.\u00a0If you have other Linn devices at home, such as\u00a0the Series 3 speakers\u00a0, you can operate them all via the app and link them if desired.<\/span><\/p>\n Because Linn builds in the necessary flexibility, there are many other ways to get music from the Majik DSM.\u00a0When it comes to streaming, you can control the player from Spotify, via a UPnP \/ DLNA player app, or via AirPlay.\u00a0Bluetooth is also there.\u00a0Linn also gets a pat on the back because they immediately ensure full Roon certification, including a modified icon of the player in the program.\u00a0A compliment is in order, because many manufacturers fail to do so.\u00a0In addition, there is a line input that you can set as a regular line-in or a phono input (MM).<\/span><\/p>\n A small criticism of how Linn handles things concerns the apps and web interfaces.\u00a0It is clear that the company does not want to leave people who are used to a certain way of working out in the cold.\u00a0If a new app then appears, the previous one will not be deleted but also kept.\u00a0In itself that is noble, because why would you as a music lover suddenly have to adjust your working method because a manufacturer wants a different app layout?\u00a0But you do have to make sure that you use the best and most beautiful way of setting and operating.\u00a0We would recommend setting Space Optimization via the web interface and not via the older Konfig app.<\/span><\/p>\n In one area, this Linn distinguishes itself from almost all comparable all-in-one devices: it also has HDMI inputs.\u00a0You will still encounter interior-friendly devices with a single HDMI connection, such as\u00a0the\u00a0NAD M10\u00a0or\u00a0Lyngdorf TDAI-1120<\/a>.\u00a0This allows you to connect the audio device to a TV and send the TV sound through your speakers.\u00a0The Majik DSM goes a step further by offering four HDMI inputs in addition to that one HDMI-ARC port that you can use to connect, say, consoles or a Blu-ray player.\u00a0The video part can handle 4K via HDMI 2.0, which is of course a must in 2020.\u00a0Quite interesting, because thanks to this you can neatly hide all devices in a piece of furniture and only one cable runs to the television on the wall.\u00a0The Majik DSM therefore resembles an AV receiver in terms of functionality, but is fully focused on stereo reproduction.\u00a0So anyone looking for a surround experience should look elsewhere, but that’s not what this Linn is all about.<\/p>\n There is nothing difficult about connecting the Linn player to your TV.\u00a0Within seconds we had laid the cable between the device and the HDMI-ARC input of a Sony KD-65AF9.\u00a0All we had to do was dive into the TV’s settings to switch the audio output to ‘PCM’.\u00a0After all, like most stereo solutions, the Majik DSM cannot process Dolby Digital or other surround signal.\u00a0Given that the end goal is stereo, that’s not a disaster.\u00a0Thanks to HDMI-ARC, controlling the volume is very easy.\u00a0You simply use the remote of your television or the remote control of the Linn.\u00a0You can also use the Linn app for this task.<\/span><\/p>\n If speakers at home don’t sound like they do in the store, chances are that it is in your room.\u00a0The shape and dimensions, how the room is decorated and where you place the speakers can have a dramatic impact on the sound reproduction.\u00a0Since your living room cannot or should not be completely transformed, you have to approach this problem differently: via a room correction function.\u00a0Software in the amplifier then applies a filter that compensates for the acoustic errors in your room.\u00a0If a certain bass tone is amplified in your living room, for example because a speaker is close to a corner, then that filter will make that frequency play a bit softer, just to say something.\u00a0You will find such functions a lot on surround devices and more and more often on stereo devices.<\/p>\n Since Linn likes to Do His Own Thing – you might have already understood that – the Scottish company takes a slightly different approach than rival manufacturers.\u00a0Where most room correction software starts from one or more measurements with a microphone in your room, Linns Space Optimization works with a model of your room that you enter yourself.\u00a0Via the Konfig app or via a slick web interface you enter the dimensions of your room, where you can also add fine-meshed things like windows, fireplaces and doors.\u00a0You can also indicate the building materials of walls and floors.\u00a0Another important element to indicate is where your speakers are and where you listen to music.\u00a0You hear it: a laser meter is very practical at this point.<\/span><\/p>\n ia a graphic menu you can optionally indicate which speakers you will use.\u00a0You can not only select Linn speakers here, because the list is immense and includes the most famous (and a number of lesser known) speaker builders.\u00a0A large number of them have been measured by Linn in their lab, which makes Space Optimization more accurate. .<\/span><\/p>\n Space Optimization will calculate a filter based on all that data.\u00a0You may like the result immediately, but if you wish, you can then adjust the filter via the web interface, for example if you think that just too few basses have disappeared from the playback.\u00a0Experimenting is also allowed and part of the fun.\u00a0There are of course also dealers who can do this for you.<\/span><\/p>\n ‘Bass Drum Concerto III’, in which Branford Marsalis performs a composition by Prokofiev with the philharmonic orchestra of the Ural, is something very special to listen to.\u00a0The work for saxophone and drum bass is somewhat nervous in nature, but it is mainly how the sound level is played throughout the four-minute piece that remains fascinating.\u00a0Percussionist Joby Burgess plays a prominent role in this musical story, a source of all kinds of rhythmic sounds that are sometimes very present, sometimes very subtly woven throughout the work.\u00a0In other words, it is an atypically classical composition that loses all impact on a wireless speaker and flourishes in a solid stereo setup.\u00a0This is why you go for better hi-fi.\u00a0We note at the Majik DSM that those dynamic jumps are taken without hearing stress,\u00a0even if we turn the volume knob to a high setting.\u00a0We are on the DALI Rubicon 2’s\u00a0still asking something from the Linn engine, but that is not a problem.\u00a0It all sounds very stress-free and pleasant.<\/p>\n The much more difficult to control Bowers & Wilkins 705 Signature stand mounts are also tough but feasible for Linn’s Class D amplifier.\u00a0In fact, sound-wise we thought that match really worked well.\u00a0The fresh, very revealing character of the British speakers fits well with the musical and warmth of the Scots, a very pleasant listening result in our opinion.\u00a0Put on ‘Lilies’ by Melanie De Biasio and you’re off for a great listening session.<\/p>\n We always took the trouble to set Space Optimization during the test period, because we already knew from the Selekt review that the function really adds something.\u00a0Although ‘take away’ is perhaps a better word choice in this case;\u00a0it’s resolution and tightness that comes with it.\u00a0We also set Space Optimization when we rolled our big Focal Sopra N \u00b0 2’s to the listening positions.\u00a0Speakers that in terms of size (and cost) contrast with the Majik DSM, but again: it’s okay.\u00a0From time to time we also added an SVS SB-2000Pro subwoofer to the Majik DSM.\u00a0Not because it was really necessary;\u00a0because even powerful speakers like the Focals can get even better with extra sub bass.\u00a0Well, we think so.\u00a0The higher goal, however, is to experience whether Space Optimization works equally well with a 2.0 and a 2.1 configuration.\u00a0After all, two speakers and a subwoofer are an interesting option if you want to use an interior-friendly pair of small bookshelf speakers, and still want to enjoy the necessary bass.\u00a0In terms of small speakers and you want to use the Majik DSM as a TV solution, then it is even more recommended.\u00a0The answer to the 2.1 question is in any case ‘yes’.<\/p>\n The Majik DSM in its new version has been transformed into an incredibly versatile device that combines excellent sound quality with just about any streaming function you could wish for.\u00a0The beautiful minimalist design subtly blends in with most interiors, while you can listen to music and TV sound in high quality.\u00a0You really just need to add speakers to use it.<\/p>\n The concept of an interior-friendly amplifier that does everything is not unique to Linn, of course.\u00a0The Majik DSM does have its own strengths, such as Space Optimization, the four HDMI inputs and the multiroom functions.\u00a0Linn also has a reputation for providing long-term support for its products, which gives the Majik DSM 2020 a solid future-proof aura.<\/span><\/p>\n [thescore]<\/p>\n","protected":false},"excerpt":{"rendered":" Linn renews the Majik DSM, making this all-in-one amplifier even more attractive and versatile.\u00a0With all possible streaming options and four HDMI inputs \/ one HDMI output, the Majik DSM is a very intriguing answer to the eternal question: “How do I get good sound quality without cluttering my living room with devices?” Whenever we think […] More<\/a><\/p>\n","protected":false},"author":10404,"featured_media":113616,"comment_status":"open","ping_status":"closed","sticky":false,"template":"","format":"standard","meta":{"footnotes":""},"categories":[642],"tags":[778],"class_list":["post-113602","post","type-post","status-publish","format-standard","has-post-thumbnail","category-hi-fi","tag-reviews"],"acf":[],"_links":{"self":[{"href":"https:\/\/www.hifiratings.com\/tech\/wp-json\/wp\/v2\/posts\/113602","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/www.hifiratings.com\/tech\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/www.hifiratings.com\/tech\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/www.hifiratings.com\/tech\/wp-json\/wp\/v2\/users\/10404"}],"replies":[{"embeddable":true,"href":"https:\/\/www.hifiratings.com\/tech\/wp-json\/wp\/v2\/comments?post=113602"}],"version-history":[{"count":1,"href":"https:\/\/www.hifiratings.com\/tech\/wp-json\/wp\/v2\/posts\/113602\/revisions"}],"predecessor-version":[{"id":465699,"href":"https:\/\/www.hifiratings.com\/tech\/wp-json\/wp\/v2\/posts\/113602\/revisions\/465699"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/www.hifiratings.com\/tech\/wp-json\/wp\/v2\/media\/113616"}],"wp:attachment":[{"href":"https:\/\/www.hifiratings.com\/tech\/wp-json\/wp\/v2\/media?parent=113602"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/www.hifiratings.com\/tech\/wp-json\/wp\/v2\/categories?post=113602"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/www.hifiratings.com\/tech\/wp-json\/wp\/v2\/tags?post=113602"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}Sleek and modern<\/h2>\n
Roots<\/h2>\n
![\"\"](\"https:\/\/www.hifiratings.com\/tech\/wp-content\/uploads\/2020\/09\/Majik_1.png\")
<\/p>\nFine-tuning<\/h2>\n
Go for the iPad<\/h2>\n
Stereo for your TV<\/h2>\n
<\/p>\nAdapted to your room<\/h2>\n
Let’s make it cozy<\/h2>\n
Conclusion<\/h2>\n